Site Information

 Loading... Please wait...
  • Learning Center
  • About Us
  • Refund and Return Policy
  • Blog
  • Contact Us
  • Call (973) 913-9734

Non-Flammable Formulations for Removing Paints and Coatings

4 Steps to Eco-Friendly Paint and Coatings Removal with an Ultrasonic Cleaner

  1. Select one of our semi-aqueous formulations below
  2. Immerse parts in an ultrasonic cleaner bath and turn unit on
  3. Rinse loosened coatings from cleaned surfaces
  4. Filter and reuse the formulations

Non-Flammable Formulations for Removing Paints and CoatingsEco-friendly removing paints and coatings from all surfaces is faster and easier with Tovatech's line of 3 semi-aqueous formulations suitable for use in a benchtop or industrial ultrasonic cleaning tank or a wash tank.

These micro-emulsions have the distinct advantage of delaminating coatings from surfaces rather than dissolving them. This means the formulations can be filtered, the delaminated coatings separated for disposal and the formulation reused for an extended period dramatically reducing the cost of liquid waste disposal.

Your Time is Important

Our experts can help you find the perfect ultrasonic cleaning package for your paint or coating removal needs.


Call or chat with us. There's no obligation and it only takes a few minutes.


Or

Chat with us

Non-Flammable Formulations for Ultrasonic and Other Cleaning Options

A wide range of paints, coatings and contaminants can be removed using non-flammable formulations diluted with water for use in benchtop or floor-mounted industrial ultrasonic cleaners offered by Tovatech. Because these formulations work as emulsions they do not dissolve coatings but loosen them for fast rinsing. This means that the formulations can be filtered and reused time and time again.

CLN-SC75

CLN-SC75 Cleaning Solution

Cleans:

  • Spray-gun parts
  • Stainless steel
  • Brass
  • and more...

Slightly acidic CLN-SC75 recommended for removing polyurea, polyurethane, epoxies, resins, and water and oil base paints from spray gun parts and tools. Use in ultrasonic cleaners or parts washers. Use full strength or dilute up to 50% with water before use.
 
 

Shipped in 1 & 5 gallon containers.

Order 1 Gallon › Order 5 Gallon ›

Link will take you to our partner website for purchase.

RS-98

Cleans:

  • Carbon steel
  • Aluminum
  • Anodized aluminum
  • Nickel and copper alloys

Neutral RS-98 recommended for removing oil and water based coatings, epoxies, alkyds, resins and inks. Dilute up to 50% with water before use.
 
 
 
 
 

Shipped in 5 gallon container.

Order Now ›

Link will take you to our partner website for purchase.

RS-100

RS-100 Cleaning Solutiont

Cleans:

  • Carbon steel
  • Aluminum
  • Anodized aluminum
  • Nickel and copper alloys

Neutral RS-100 recommended for general removal of electro and powder coatings from substrates without affecting protective metal primers such as zinc and other anti-corrosion coatings. Also, removes coatings from carbon steel, nickel, magnesium, brass, aluminum and anodized aluminum. Dilute up to 50% with water before use.

Shipped in 5 gallon container.

Order Now ›

Link will take you to our partner website for purchase.

Using Flammable Solvents for Removing Paints and Coatings
 

When a flammable solvent such as IPA or acetone is required to remove paints and coatings special attention must be paid to avoid explosion hazards due to ignition of solvents and vapors.

In every case, removing paints and coatings with flammable solvents calls for strict observance of plant safety and local public safety regulations.

Tovatech offers two options for the safe use of flammable solvents to remove paints and coatings from metal parts.

Using Flammable Solvents for Paint and Coating Removal from Small Parts

Small parts that fit into beakers for immersion in IPA or other flammable solvents for paint and coating removal are candidates for the Tovatech ultrasonic beaker kits in four options with two beakers of 600 or 1000 ml.

Using Flammable Solvents for Industrial-Scale Paint and Coating Removal

When flammable solvents are required to remove paints and coating from large parts the industrial-scale SOL XP explosion proof ultrasonic cleaner from Tovatech is your best bet. Available in tank capacities of 2, 4, 6, 9 and 33 gallons the SOL XP series helps assure that your operations comply with nationally recognized fire safety standards.

See all of our options for cleaning with flammable solvents.

Questions?

Simply call for pricing or help selecting a unit

Calls normally last 5 min. or less!

Get a FREE Product Catalog & Pricing Guide

  • Product details & information
  • Product pricing
  • Immediately sent to your inbox