Site Information

 Loading... Please wait...
  • About Us
  • Our Specialists
  • Blog
  • Contact Us
  • Call 973-975-0155

Elmasonic S-Line Cleaners



High performance cleaning, mixing, degassing

Elmasonic S is powerful and versatile with 3 modes designed to clean parts, degas solvent, and prepare samples. With extra ultrasonic power and functionality, it's perfect for high performance applications. LED display of time and temperature.


Tank Volume
Tank Internal Dimensions
(W x D x H inches)
S10/H 0.2 7.5 x 3.3 x 2.4
S15/H 0.5 5.9 x 5.4 x 3.9
S30/H 0.7 9.4 x 5.4 x 3.9
S40/H 1 9.4 x 5.4 x 5.9
S60/H 1.5 11.8 x 5.9 x 5.9
S70/H 1.8 19.9 x 5.4 x 3.9
S80/H 2.4 19.9 x 5.4 x 5.9
S100/H 2.5 11.8 x 9.4 x 5.9
S120/H 3.4 11.8 x 9.4 x 7.9
S180/H 4.7 12.9 x 11.8 x 7.9
S300/H 7.4 19.9 x 11.8 x 7.9
S450H 11.9 19.7 x 11.8 x 11.8
S900H 23.8 23.6 x 19.7 x 11.8




mode-purple.pngmode-green.pngmode-blue.pngThe 37 kHz S line models can be operated in Normal (fixed frequency) mode, Sweep mode, or Degas mode. These modes are optimized for mixing, cleaning, and degassing, respectively.  Sweep mode produces a continuous slight variation of frequency to provide uniform and thorough cleaning.


Elmasonic S units have approximately 30% more ultrasonic power than the corresponding E line units.  They clean faster and more uniformly.

CONVENIENT LED DISPLAYelma-s-controlpanel-v2.jpg

led-display.pngAll S line models (except the S10/H) have a series of LEDs that continuously and simultaneously show set time, time remaining, set temperature, and actual temperature.  No need to scroll through menus to see set and operating parameters.


powertrack.pngThe microprocessor-controlled generator maintains constant ultrasonic power, sensing and adjusting for light or heavy loads in the tank.  Digital operation ensures reproducible performance from run to run.


heater.pngAll S line models (except S150) are available with a heater than can be set in 5 degree increments from 30°C to 80°C.  Models S10-S300 are also available without heaters. Although ultrasonic tanks should never be operated without liquid, the ceramic heaters are dry-run proof.  

timer.pngThe timer can be set from 1-30 minutes or for continuous operation with manual shut off.  If the unit is set to continuous operation it will automatically shut off after 12 hours for safety.  This safety feature prevents damage to the ultrasonic equipment as well as to the parts being cleaned.

drain.pngAll S line models (except S10H and S15H) have a rear drain with a valve for easy emptying of the tank.  The valve is located on the side of the tank for easy access.